Pre-Mix Electric Foam Unit

FPCF516IJR

Contact us to purchase

  • Draws from pre-mix solution
  • Powered by 120 VAC electricity
  • 25 ft. (7.6 m) coiled twin-line tubing for convenient use
  • 65 degree fan tip for increased coverage
  • On-board compressor
  • Compact design
    
LIQUID TEMPERATURE RANGE 40-100ËšF (4.4-37ËšC)
ELECTRICAL REQUIREMENTS 120 VAC at 60 Hz, 10 amps (GFCI protected outlet)
OPERATING VOLTAGE 120 VAC
CHEMICAL COMPATIBILITY Chemical products used with this equipment must be formulated for this type of application and compatible with unit materials and pump seals. For more information on chemical compatibility, consult the manufacturer or SDS for your product or contact our customer service department.

 

POWER TYPE Electricity
CHEMICAL PICKUP TYPE Draws from pre-mixed solution
NUMBER OF PRODUCTS UNIT CAN DRAW FROM (AND WHETHER IT DRAWS SIMULTANEOUSLY OR ONE AT A TIME) One product
SUCTION LINE LENGTH/DIAMETER 6 ft. (1.8 m) hose with 1/4 in. (6.4 mm) inside diameter)
DISCHARGE HOSE DIAMETER/LENGTH 25 ft. (7.6 m) coiled twin-line tubing, with 1/4 in. (6.4 mm) outside diameter
DISCHARGE WAND/TIP TYPE Polypropylene trigger handle with 65Ëš fan tip
OUTPUT DISTANCE 4-6 feet (1.2-1.8 m)
OUTPUT VOLUME 6 gal/min (22.7 l/min) of foam
FLOW RATE* 1 gal/min (3.8 l/min)
PUMP SEALS Santoprene, Viton, or Kalrez

*Dilution rates and flow rates given are based on chemical with viscosity of water and factory air pressure settings.

What’s in the box?

  • Complete unit with discharge hose and wand
  • User manual

Purchasing options

PUMP SEAL MATERIAL
FI-JR Santoprene (standard)
Viton (V)
Kalrez (K)

Add bold option codes to item number as shown.  For standard options, no option code is needed. Examples:

FI-JR (standard unit with Santoprene pump seals)
FI-JRV (unit with Viton pump seals)