10 Gallon Battery Foam Unit with Stainless Steel Ball Valve
FPFU516SBV
Contact us to purchase
- Draws from pre-mixed solution
- Battery operated
- Up to 45 minutes of continuous use from one charge
- Stainless ball valve with foam fan tip
- Hinged back plate provides tool-free access to components
- Natural color tank for easy visibility of product levels
- Hinged lid
- Color coding options:
Lid – 5 colors (BK, BL, GN, YL, RD)
Discharge hose – 4 colors (BL, GN, YL, RD) - Integrated hose wraps
- Front-facing drain
| LIQUID TEMPERATURE RANGE | 40-100ËšF (4.4-37ËšC) |
|---|---|
| ELECTRICAL REQUIREMENTS | 120 VAC at 60 Hz, 1 amp (GFCI protected outlet) for battery charger only |
| OPERATING VOLTAGE | 12 VDC |
| CHEMICAL COMPATIBILITY | Chemical products used with this equipment must be formulated for this type of application and compatible with unit materials and pump seals. For more information on chemical compatibility, consult the manufacturer or SDS for your product or contact our customer service department. |
| POWER TYPE | Battery |
|---|---|
| BATTERY CHARGE TIME (FROM FULL DEPLETION) | 8 hours |
| BATTERY RUN TIME (FROM FULL CHARGE) | 45 minutes of continuous use |
| CHEMICAL PICKUP TYPE | Draws from pre-mixed solution |
| NUMBER OF PRODUCTS UNIT CAN DRAW FROM (AND WHETHER IT DRAWS SIMULTANEOUSLY OR ONE AT A TIME) | One product |
| SUCTION LINE LENGTH/DIAMETER | 3/8 in. (9.5 mm) inside diameter |
| CAPACITY | 12.5 gallons (47.32 liters) |
| DISCHARGE HOSE DIAMETER/LENGTH | 12 ft. (3.66 m) hose, with 3/8 in. (9.5 mm) inside diameter |
| DISCHARGE WAND/TIP TYPE | Polypropylene trigger handle with 50Ëš fan tip |
| OUTPUT DISTANCE | 5-6 ft. (1.52-1.83 m) |
| OUTPUT VOLUME | 4-5 gal/min (15-18.93 l/min) of foam |
| FLOW RATE* | Up to 1 gal/min (3.8 l/min) |
| PUMP SEALS | Santoprene, Viton, or Kalrez |
| WHEEL TYPE | Two 10 inch non-marking wheels |
*Dilution rates and flow rates given are based on chemical with viscosity of water and factory air pressure settings.
Resources
What’s in the box?
- Complete foam unit with discharge hose and wand
- Battery charger
- User manual
Purchasing options
| Â | PUMP SEAL MATERIAL | Â |
|---|---|---|
| FI-10N | Santroprene (standard) | -B-SSBV |
| Viton (V) | ||
| Kalrez (K) |
Add bold option codes to item number as shown. For standard options, no option code is needed. Examples:
- FI-10N-B-SSBV (standard unit with Santoprene pump seals)
- FI-10NV-B-SSBV (unit with Viton pump seals)
Other available options:
- Color coding – lid +/or discharge hose